Cadi.Sense Wireless Thermometer, Руководство пользователя, Страница: 29 / 36

Cadi. Sense User Manual
T-S1-800.900-I10-B01 29
•
Click the “Connect to WiFi Router” icon. When a screen appears and asks “Please
select your WiFi router”, click on your router’s SSID, key in your router’s password, then
click “Apply”. (Please be patient as SmartNode needs about a minute to connect to
your WiFi router and another minute to reboot.) Click Refresh if you don't see your
router’s SSID on the list.
Note (a): After successful connection to your WiFi router, SmartNode will remember the
router’s SSID and password (unless you have intentionally unmarked the default “Remember
Settings” during connection). So if you were to switch off and on SmartNode, it will
automatically re-connect to your WiFi router, taking about 2 minutes.
Note (b): After successful connection to your WiFi router, you may not be able to use
“http://10.10.10.10” to access your SmartNode anymore. Nonetheless you can still access it
using the IP address assigned by your router.
Note (c): You may need to reboot (or unplug the Ethernet cable then plug in again) your
PC/laptop to connect to the SmartNode. You may need to enable Enhanced Compatibility
if you are using Windows 7 with certain brands of WiFi routers.
Use SmartNode as a WiFi Repeater
Once the WiFi connection from the SmartNode to your main router/AP is established you can
connect your WiFi devices like laptops and smartphones through the SmartNode SSID. These
devices will obtain an IP address from the main AP/router and should be able to access the
Internet from farther locations previously unreachable by your WiFi signal.
Configure SmartNode as a WiFi AP
SmartNode can also be configured as a WiFi Access Point to turn a regular modem-router
into a WiFi capable networking device to connect WiFi-enabled devices such as laptops and
smartphones.