SHELL - BREEZE
16
Fig. 24 - Rear screws removal
Fig. 25 - Remove the upper coque from above.
Fig. 26 - Remove the lower coque by pulling it
towards you.
6.6
BREEZE AIRTIGHT SIDE PANEL DISASSEMBLY
To access the internal stove parts, disassemble the side panels as indicated below:
• Remove the cast iron cover (see
Fig. 27
).
• Loosen the rear screws of the sides (see
Fig. 28
).
• Open the side and release it from the teeth (see
Fig. 29
).
• To assemble proceed in reverse order.
Fig. 27 - Top removal
Fig. 28 - Remove screws
Fig. 29 - Removing the side panel
6.7
INSTALLATION OF CONCENTRIC SMOKE OUTLET WITH COMBUSTION AIR DECOUPLED (ONLY
MODEL BREEZE AT)
The stove is designed to be connected to the flue by means of a concentric hose, through the specific preinstalled fitting.
If different requirements make it necessary to withdraw combustion air directly from an outside wall, the air hose can be decou-
pled from the concentric fitting.
Proceed as follows:
• Pull off the flexible hose (combustion air) from the concentric fitting, unscrewing the metal clamp (see
Fig. 30
).
• The hose is now ready to be connected to an outside wall (see
Fig. 31
).
