Cadel BREEZE AIRTIGHT Скачать руководство пользователя страница 31

Страница: 31 / 47

KRISS

- TECNA

- EVO

- ELISE

- SHELL

- CRISTAL

- GLASS - VERVE AT - PRETTY AT - TITANIA AT - VENERE AT - BREEZE AT

• Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not

efficient, please endow you with one in compliance with the law.

• Connect the supply cable first on the back of the stove (see

Fig. 74

) and then at a wall electric socket.

Fig. 74 - Electric socket with master switch

• The master switch O/I (see

Fig. 74

) is to open only to switch the stove on, otherwise it is advisable to keep it off.

• Do not use extension cables.

• If the feeder cable is damaged, it must be replaced by an authorized technician.

• When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.

5.17 CONNECTION TO THE EXTERNAL THERMOSTAT

The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room

thermostat. This operation must be executed by an authorized technician.

Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat

(default setting OFF) as indicated below:

• Press the "menu" button.

• Scroll with the arrows to "Settings".

• Select by pressing "menu".

• Scroll with the arrows again to "Ext.Thermostat".

• Select by pressing "menu".

• Press the - + buttons.

• To activate the external thermostat select "on".

• Press the "menu" button to confirm.

5.18 STOVE CALIBRATION AND DEPRESSION MEASUREMENT

This stove has a pickup point positioned on the tank in order to measure the depression of the combustion chamber and verify its

proper operation.

To do this, proceed as follows:

• Remove inspection casing "C" from the back of the stove (see

Fig. 75

• Loosen nut "D" from the bottom of the tank, near the pressure switch.

• Connect a digital pressure switch with a tube to detect the depression (see

Fig. 76

• Load the feed screw via appropriate function.

• Start the stove and set "Fire" at power 1 (the start of this stove lasts from 8 to 10 minutes to ensure minimum draught).

• Compare the read values with those on the table.

• Change power every 10 minutes and wait for it to stabilise.

• Access the user menu and, if necessary, change the parameters.

Содержание BREEZE AIRTIGHT
















































Результаты поиска

Содержание BREEZE AIRTIGHT

Отзывы:

Похожие инструкции для BREEZE AIRTIGHT

Бренды по названию

Популярные бренды

Cadel BREEZE AIRTIGHT, Руководство по установке

Результаты поиска

Содержание BREEZE AIRTIGHT

Отзывы:

Похожие инструкции для BREEZE AIRTIGHT

Бренды по названию

Популярные бренды