Cadel BREEZE AIRTIGHT Скачать руководство пользователя страница 32

Страница: 32 / 47

KRISS

- TECNA

- EVO

- ELISE

- SHELL

- CRISTAL

- GLASS - VERVE AT - PRETTY AT - TITANIA AT - VENERE AT - BREEZE AT

Fig. 75 - Casing removal

Fig. 76 - Digital pressure switch connection

DATA

Stove depression -

temperature 7 kW 19/21 Pa - 110°C

32/35 Pa - 125°C

48/50 Pa - 145°C

52/54 Pa - 160°C

63/65 Pa - 165°C

Stove depression

- temperature 8.5

19/21 Pa - 110°C

32/35 Pa - 125°C

49/51 Pa - 155°C

63/65 Pa - 165°C

68/70 Pa - 180°C

Stove depression -

temperature 9 kW 19/21 Pa - 110°C

32/35 Pa - 125°C

49/51 Pa - 155°C

63/65 Pa - 165°C

73/75 Pa - 190°C

NB: for good combustion, the depression values must be b -5 Pa and the temperature values b - 10°C.

SPECIAL MAINTENANCE

6.1

INTRODUCTION

For a long working life of the stove, have a periodic cleaning of the stove as described in the following paragrafs.

• Fume outlet pipes (fume c chimney flue + chimney pot) must always be cleaned, scrubbed and checked by an autho-

rized technician in compliance with local regulations, with the instructions of the manufacturer and those of your insurance

company.

• It is also necessary to have the combustion chamber, motors and fans cleaned and to have the gaskets and the electronical

elements checked at least once a year.

All these operations must be planned in time with your Autorized Technical Assistance Service.

• After a long ineffective time, before turning on the stove check if there are obstructions in the fume exhaust.

• If the stove had been using continuously and intensely, the whole system (chimney included), must be cleaned and checked

more frequently.

• In case of replacement of damaged pieces please ask for the original spare part at the Autorized Retailer.

6.2

FEED SCREW MAINTENANCE

Proceed as follows for the feed screw maintenance:

Содержание BREEZE AIRTIGHT
















































Результаты поиска

Содержание BREEZE AIRTIGHT

Отзывы:

Похожие инструкции для BREEZE AIRTIGHT

Бренды по названию

Популярные бренды

Cadel BREEZE AIRTIGHT, Руководство по установке

Результаты поиска

Содержание BREEZE AIRTIGHT

Отзывы:

Похожие инструкции для BREEZE AIRTIGHT

Бренды по названию

Популярные бренды