manualshive.com logo in svg

Cadel ATENA3 PLUS 12, Руководство по установке

Поделиться
Скачать
Cadel ATENA3 PLUS 12 Скачать руководство пользователя страница 33

33

ATENA3 PLUS 12/14 - DUKE 12/14 AIRTIGHT - SABA 12/14 - MITHOS3 PLUS 12/14

•  Remove the sides.

•  Remove dust build-up using a brush or a vacuum cleaner (see 

Fig. 108

).

7 

IN CASE OF ANOMALY

7.1 

PROBLEM SOLVING

Before of every Authorized Technician intervention, the same Technician has the duty to check if the parame-

ters of the mother board correspond to those of the table you own.

In case of doubts regarding the use of the stove, please contact ALWAYS the Authorized Technician on order to 

avoi irreparable damages!

PROBLEM

CAUSE

SOLUTION

INTERVENTION

The control display 

does not switch on

The stove is 

without power 

supply

Check if the plug is connected.

Burned protection 

fuse in the electric 

socket

Replace the protection fuses in the electric socket (3.15A-

250V). 

Faulty control 

display

Replace the control display.

Faulty flat cable

Replace the flat cable.

Faulty electronic 

board

Replace the mother board.

Содержание ATENA3 PLUS 12









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды