Page 3
509 Sharptown Road P.O. Box 345 Bridgeport, NJ 08014
Email: [email protected] Fax: 856-467-5511
Internet: http://caddycorp.com Phone: 856-467-4222
Utility Distribution System Model ID
Installation
1.
Read the entire manual and study drawings before starting installation.
2.
Check that all electrical and plumbing rough-ins are as specified and agree with the drawing.
3.
The
ID
system consists of the following parts:
a.
Riser
b.
Raceway
c.
Pedestal
4.
Remove all access panels on raceway, riser and pedestal to reveal internal plumbing, electrical systems,
and internal flanges.
5.
Place ID sections according to the drawing to determine the proper mounting position beneath the hood.
6.
Once sections are in position, join field joints (if any) by bolting internal flanges together and applying
silicone sealant over seams.
7.
Secure risers to floor with appropriate bolts.