background image

Congratulations 

on your purchase of a high quality Cadco Commercial warming

 appliance.

IMPORTANT SAFEGUARDS

1.

Read all instructions before use

.

2. 

Do not touch hot surfaces!  Always use hot pads or pot holder until unit cools.

3.

To protect against electrical hazards, do not immerse cord, plug or tray in

water or any other liquid.

4.

Close supervision is necessary when any appliance is used by or near

children.

5.

Unplug unit from outlet when not in use or before cleaning.  Allow to cool

completely before cleaning or storing.

6.

Do not operate any appliance with a damaged cord or plug or if the appliance

malfunctions or has been damaged in any manner.  Call Cadco Customer

Service at 860-738-2500 with any questions or  service needs. Canadian

customers call Joicey Food Services, Ltd. in Ontario, Tel. (905) 825-9665.

7.

Do not use this appliance outdoors.

8.

Do not let cord hang over an edge of table or counter.  Do not let cord touch

appliances hot surface.

9.

Do not place on or near a hot gas or electric burner, or in a heated  oven.

10.

Do not use this appliance for other than intended use.

11.

Do not clean with metal scouring pads.  They can scratch and ruin your finish.

12.

A fire may occur if this appliance is covered or touching flammable material,

including curtains, walls, etc., when in operation.

13.

Do not use plastic dishes or plastic wraps in warmer.

14.

Do not run the unit dry. It is designed for wet operation only.

SAVE THESE INSTRUCTIONS

IMPORTANT NOTES

1. Your unit is equipped with a grounded, current-carrying plug. This plug will

fit into any 3 pronged outlet. This is a safety feature.

2.

Electrical connection must be a proper outlet for the 3 pronged cord.

Before connecting power, make sure the voltage and frequency

correspond to the data plate on the unit,  and that your electrical circuit

can handle the Amps used by the unit in addition to any other appliances

operating on the same circuit.

3. A short power cord is provided to reduce the hazards resulting from accidents

such as tripping, entanglement, etc.

-If a long cord set or extension cord is used:

(A) The marketed electrical rating of the cord set or extension cord should

be at least as great as the electrical rating of the appliance.

(B) The longer cord should be arranged so that it will not drape over the

countertop or tabletop, where it can be pulled on by children or tripped over

accidentally.

OPERATING INSTRUCTIONS

1.  Plug unit into appropriate electrical outlet. (See Important Notes.)

2.

This unit is for wet operation only. Running it dry will void the warranty.

   

l

 Add about 4 quarts of water to 

inner water holder

There should be liquid

at least to the MIN fill line at all times during operation.

   

l

 Do not exceed the MAX fill line in the 

inner water holder

 when using 

well

inserts

 /steam table pan(s)

   

l

 You may use more than 4 quarts of liquid in the 

inner water holder

 when

NOT using 

well inserts

 /steam table pan(s) (EX., if keeping corn on the cob

warm or heating hot dogs directly in the 

inner water holder

.)

3. If using steam table pans or 

well inserts

, position them as applicable:

l

 Steam table pans should be positioned so their top edges sit on the top lip

of the 

inner water holder

. Use enough steam pans to cover the top of the

inner water holder so steam does not escape. Cadco warmers will handle

one full size, two half size, or three third size steam table pans.

l

 If using 

well inserts

, first put the 

lid

 on the 

inner water holder

. Then

position the 

well inserts

 in the holes in the 

lid

, and put 

well covers

 in place.

If 

well inserts

 “bob” in the water and do not sit firmly in place, remove some

of the water from the 

inner water holder

 through the 

safety spigot

.

NOTE: Models DWW-2P & DWW-11 have two 9 quart well inserts = total 18 quarts.

Model DWW-3P has three 1/3 size, 5 quart, 6” deep steam pans = total 15 quarts.

5. Turn unit on by pressing the 

power switch

 to the On (l) position. When the

power is on, the 

power switch

 will light up with a green light.

6.  Turn 

infinite heat control knob

 to “212

o

 F”/ high position and preheat for

approximately 10 minutes if using 4 quarts of water. (Preheat longer if using

more water.) Then set to desired heat position for holding temperature. The

infinite heat control knob

 has 13 heat settings ranging from 104

o

 - 212

o

F

(40

o

-100

o

C.) Each line on the control knob represents a 5

o

 C increment. Use

the following chart to choose your heat setting:

40

o

C = 104

o

F 45

o

C = 113

o

F 50

o

C = 122

o

F 55

o

C = 131

o

F

60

o

C = 140

o

F 65

o

C = 149

o

F 70

o

C = 158

o

F 75

o

C = 167

o

F

80

o

C = 176

o

F 85

o

C = 185

o

F 90

o

C = 194

o

F 95

o

C = 203

o

F

100

o

C = 212

o

F

7. The 

temperature light

 will come on only during heat cycle, and will go out

when set heat level is attained.

inner water holder

(stainless steel)

Note: Removing the wells/steam

pans, well covers, and lids from the

DWW-3P or DWW-11 provides the

Full Size Warmer configuration.

Full Size Warmer

configuration

2

3

Model DWW-3P*

infinite

temperature

control knob

1/3 size

steam pan

(3 supplied)

clear

polycarbonate lid

(3 supplied)

power switch

safety spigot

temperature light

power

switch

temperature

light

well insert

(2 supplied)

well cover

(2 supplied)

Model DWW-11

safety

spigot

infinite

temperature

control knob

(remove to

access inner

water holder)

lid

utensil slot

(1 per lid)

*Model DWW-2P =

same as DWW-3P,

 except has (2) 9 qt.

pans & lids

Отзывы: