background image

 

 

 

 

Page 

18

 of 

19

 

 

DOC02-Using Waves Tracks Live - Issue C - July 2016 

 

The Waves ports are accessed via the assign input /send screen of each channel on the console, 

shown below: 

 

 

 

 

To use Waves, the channel assignment window ‘

Assign  input’

, ‘

Assign send

 

etc. may be used to 

configure any desired signal path / mix involved in taking audio from, or sending audio to, the Tracks 

DAW.   

 

 If you playback audio from Track 1 (SoundGrid 1) on the computer: 

• This track may be heard when ‘

From Waves 1

’ is assigned as an input on a channel 

assignment on the console, and sent to the ‘

I/O rack

’ output for the speaker   

• If you assign an input to another channel from ‘

I/O rack

’ input audio source on the CDC six  

• Send this channel to ‘

To Waves 2

’ then this may be monitored/recorded at Track2 on the 

computer.  

 

Note:

 It is important to note that the console’s local I/O or AES ports, and the Waves I/O ports 1- 16, 

share the same internal resource on the CDC six. In addition, Waves output 63 and 64 are not 

available as they internally used for the headphone outputs.

 

 
Be aware of this selecting which SoundGrid channels/track numbers you use. It is easy to get some 

loud distortion or feedback paths by accident…. 

Screen shot from a CDC eight 

Содержание Waves Tracks Live




















Отзывы: