Page
15
of
19
DOC02-Using Waves Tracks Live - Issue C - July 2016
The only select buttons that you have control over are
a)
SAMPLE
rate
MASTER/SLAVE
.
This must be selected as
SLAVE
. It should auto select 96 kHz if the console has successfully
connected.
b)
START
, under Autoconfig.
This will cause the program to scan the system and should discover the console denoted
‘Cadac’ in the Rack A window.
The Rack B box represents the SoundGrid / Tracks DAW.
c) Network Port
The appropriate network address for the Ethernet port attached to the console should be
selected here.
Once there is no text in
RED
then this setup is complete. There is one other window which must be
configured.
Select
PATCH
then
DEVICE to DEVICE
. You will see the following screen:
