Cadac B-Type, Инструкция по установке и эксплуатации

Страница: 84 / 142

6-8 Group Module 7756
B-Type Revision B2005-2
914166 *UDQG # 0DVWHU #5# 6HOHFW
Press this switch to put the DC Master Fader under the overall control of the Grand
Master 2 Fader.
914167 ' 1 & 1# 'LVSOD\ #+ SURJUDPPDEOH ,
An alpha-numeric display that allows up to eight characters to be programmed on the
PC and sent to the fader display with the rest of the cue information. It is possible to
send different information for each cue in the show.
914168 087( #+ SURJUDPPDEOH ,
When MUTE is ON the channel faders controlled by the DC Group are (indirectly)
muted.
914169 5'< #+ 5HDG\ ,
Press the RDY button when you are ready to send dynamic data to the PC (motor
faders only). No data is sent until Write mode is invoked by touching the fader knob.
A fader in RDY mode will respond to movements sent by the PC until the fader knob
is touched. The RDY LED will flash when data is being generated.
91416: ,62 #+ ,VRODWH ,
When ISO is ON, the fader is effectively disconnected from the computer system. It
cannot send commands to the computer, or receive commands from the computer,
but the fader still responds as a VCA master.
All faders, including DC Masters, may be put in isolate mode by pressing the MOD-
ULE ISOLATE “SET” on the CCM. Similarly, all faders including DC Masters may be
taken out of isolate mode by pressing the MODULE ISOLATE “CLEAR” switch on the
CCM.
91416; '& # 0DVWHU # )DGHU
A standard audio taper fader with a 100 mm travel, controls all channel VCA faders
selected to it.
91416< )DGHU # 2SHQ
The Fader Open LED illuminates as soon as the fader moves away from infinity,
unless the MUTE function is set ON locally or under program control.