Cadac B-Type, Инструкция по установке и эксплуатации

Страница: 60 / 142

4-4 Input Channel module 7889
B-Type Revision B2005-2
714144 ,QSXW #5# 3KDVH # &KDQJH
Press the “Ø” button to reverse the phase of input 1.
714145 ,QSXW #5# RQ 2 RII
Press the ON button to access the audio output from input 1 ‘head’ amplifier. This
switch is programmable and its condition is recorded as part of the console status.
714146 2VFLOODWRU 2 31* # %XV # 6HOHFW
Press the “~” button to connect input 1 and 2 to the Oscillator/PNG bus.
714147 0HWHU # 'LUHFW # 2 2 3
Press this button to ‘monitor’ the Direct O/P on the 20 segment LED meter adjacent
to the fader (see also 4.1.16 and 4.1.52).
714148 'LUHFW # 2 2 3 # 3UH 0 (4
Press this switch to send the Direct O/P signal from before the equalizer (see also
4.1.16).
714149 'LUHFW # 2 2 3 # /HYHO
The Direct O/P level potentiometer allows you to set the level of the direct output sig-
nal as required. The ‘channel LED meter’ may also be used to monitor the direct out-
put level. The default condition for the direct output signal is pre-fader and post-EQ.
71414: 'LUHFW # 2 2 3 # 3RVW 0 )DGHU
Press this switch to control the direct output signal with the channel fader.
71414; 6XE # *URXS # URXWLQJ # VZLWFKHV
Twelve latching switches that allow you to route the channel signal to any or all of the
Sub Group mixing buses.
71414< 3DQ # ,QVHUW
Inserts the “Pan Pot” (see 3.8.20) across ‘odd’ and ‘even’ pairs of Sub Group buses.
This switch is programmable and its condition is recorded as part of the console sta-
tus.
714153 3DQ # 3RW
When the Pan Insert switch is selected, the Pan Pot allows you to position the chan-
nel signal relative to any ‘odd’ and ‘even’ pair of Sub Groups.