background image

1

1

CAUTION

Provide ample ventilation. This gas appliance consumes air (oxygen). Do not use this appliance in an unventilated space to 

avoid endangering your life. If still more gas appliances and/or occupants using gas are added to the space, additional ventilation 

must be provided.

IMPORTANT

Read these instructions carefully so as to familiarise yourself with the appliance before connecting it to a gas cylinder.

Retain these instructions for future reference.

GB

1. Introduction

•   This appliance complies with SANS 1539:2017.

•   This appliance shall be used exclusively on CADAC domestic gas cylinders. 

•   It may be hazardous to attempt to fit the appliance to other types of gas cylinders.

• 

 Appliance  category:

 Cylinder Vapour Pressure propane / butane mixture (LPG). 

•  

Nominal consumption:

 168 g/hr

•  

Nominal Heat Input:

 2.3kW  

•   This appliance uses a No.21 CADAC jet.

•  

Maximum pot size:

 Diameter 300mm.

2. Safety information

•   Check that the seal (H)(Fig. 2) is in place and in good condition before connecting the 

appliance to the gas cylinder (K). 

•   DO NOT USE THE APPLIANCE IF IT HAS A DAMAGED OR WORN SEAL. REPLACE IT. 

•   Do not use an appliance that is leaking, damaged or that does not operate properly. 

•   The appliance shall only be used in a well-ventilated location, if used in-doors.

•   Always operate the appliance on a firm level surface.

•   Ensure the appliance is used away from flammable materials. Minimum safe distances 

are: above the appliance 1.2m. At the rear and sides 600mm (See Fig.1).

•   Gas cylinders must be fitted or changed outdoors, away from any source of ignition 

such as naked flames, electric fires and away from other people.

•   If there is a leak on your appliance (smell of gas), immediately close the cylinder valve 

and take it outside into a well-ventilated flame free location where the leak may be 

detected and stopped. Do not try to detect leaks using a flame. Soapy water should be 

used.

•   Never leave the appliance unattended when lit.

•   In the event of light back (ignition inside the burner (A) or mixing tube), immediately 

turn off the gas supply by • 

 

closing the control valve on the cylinder. After the flame is extinguished, re-light 

the appliance as described below. Should the flame persistently light back, return the product to your authorised CADAC repair agent.

•   Do not modify the appliance. Do not use it for anything for which it has not been designed.

•   During use, parts of the appliance will become hot.  Avoid touching hot parts with bare hands. The use of oven gloves is 

recommended.

•   Keep young children away from the appliance at all times.

3. Fitting and changing the gas cylinder

•   Check that the seal (H)(Fig.2) is in place and in good condition before connecting the appliance to the gas cylinder (M). 

•  

DO NOT USE THE APPLIANCE IF IT HAS A DAMAGED OR WORN SEAL. REPLACE IT. 

•   Do not use an appliance that is leaking, damaged or that does not operate properly. 

•   The appliance shall only be used in a well-ventilated location, if used in-doors.

•   Always operate the appliance on a firm level surface.

•   Ensure the appliance is used away from flammable materials. Minimum safe distances are: above the appliance 1.2m. At the rear and 

sides 600mm (See Fig. 1).

•   Gas cylinders must be fitted or changed outdoors, away from any source of ignition such as naked flames, electric fires and away from 

other people.

•   If there is a leak on your appliance (smell of gas), immediately close the cylinder valve and take it outside into a well-ventilated flame 

free location where the  leak may be detected and stopped. Do not try to detect leaks using a flame. Soapy water should be used.

•   Never leave the appliance unattended when lit.

•   In the event of light back (ignition inside the burner (A) or mixing tube), immediately turn off the gas supply by closing the control  

valve on the cylinder. After the flame is extinguished, re-light the appliance as described below. Should the flame persistently light 

back, return the product to your authorised CADAC repair agent.

•   Do not modify the appliance. Do not use it for anything for which it has not been designed.

•   During use, parts of the appliance will become hot.  Avoid touching hot parts with bare hands. The use of oven gloves is  

recommended.

•   Keep young children away from the appliance at all times.

Fig. 1

Отзывы: