The non-stick grill plate is coated with a tough durable non-stick coating that has been used with great success on some of the best cookware
in the world. Nevertheless, taking care of it can help you to enjoy extra years of healthy, easy, non-stick cooking.
Use only low or medium heat settings to help retain the valuable nutrients in the food and maintain the non-stick surface.
Whilst the non-stick coating is very durable, it can easily be damaged by the use of metal cooking utensils. It is therefore recommended that only
plastic or wooden utensils be used when cooking.
Do not overheat the non-stick grill plate and always add a little cooking oil to the surface before use.
Always allow the non-stick reversible grill plate to cool before immersing in water.
The non-stick coating is perfectly safe in the dishwasher, but the non-stick surface is so easy to clean that a quick hand-wash does the trick. The use
of abrasive detergents is not recommended, as this will permanently damage the non-stick surface.
After cleaning recondition the surface with a light wipe of oil.
After use, wait until the appliance has cooled down, disconnect it from the gas cylinder and store them in a cool dry place. Store your cylinder in a
well ventilated area.
Should the appliance operate abnormally after storage and all checks referred to in Sections 5 and 8 have not isolated any problem, the venturi may be
blocked. A blocked venturi would be indicated by a weaker yellowish flame or no flame at all in extreme cases. Under these circumstances it will be
necessary to remove the burner as described under Section 7 - General Maintenance, and to check and thoroughly clean out any foreign matter which
may have gathered in the venturi.
It helps to place the appliance in a plastic bag when not in use as this will prevent the ingress of dirt and insects, which may affect the gas flow.
Always allow the unit to cool down before packing into carry bag.
Keep the lid closed when not in use as this will prevent the ingress of dirt, which may affect the gas flow.
Any modifications will render the CADAC warranty null and void.
If you cannot rectify any fault by following these instructions, contact your local CADAC distributor for inspection / repair.
Caring for the Non-Stick Aluminium Grill Plates
Models 185F, 186F and 187F
Model 184F
10.
STORAGE
11.
SPARES AND ACCESSORIES
12.
RETURNING THE APPLIANCE FOR REPAIR OR SERVICE
Handle the appliance with care. Do not drop it.
Always use genuine CADAC spares as they have been designed to give optimum performance.
Do not modify the appliance. This may cause the appliance to become unsafe.
GB
SPARES AND ACCESSORIES
Description
Description
Jet 64H (50m/bar)
Pot Stand
Carry Bag
Aluminium Grill Plate Flat
Part No.
Part No.
501-0230
182-1
182-4
182-2
Jet 68H
501-0237
Wire Grid
Aluminium Grill Plate Ribbed
182S1
182-3
CADAC
CADAC SCANDINAVIA
PO Box 43196
Camp Aps
Ratio 26
Industria
Gasværksvej
6921 RW
2042
9000 Aalborg
Duiven
South Africa
Scandinavia
The Netherlands
Tel: ++27 11 473 8600
Phone: +4572183280
Tel: ++31 26 319 7740
Fax: ++27 11 474 3875
Fax:++31 26 319 7743
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
Web site: www.cadac.co.za
Customer care: 0860 223 220 (RSA Only)
CADAC EUROPE BV
