10
27/11/2013
15:50
9.4 Channel
Cactus V6 communicates to each other via radio frequency. There are in total 16 channels
available in V6. Always make sure that all of your V6 transceivers are set to the same
channel:
1. To set both TX and RX to the same channel, press
Menu
, the LCD will show
<CHANNEL> and the default channel number. Press
OK
and turn the selection dial to
the preferred channel number. Press
OK
to set other menu items or press
Menu
to exit.
2. The selected channel number will be shown on the LCD status screen.
9.5 Grouping
(Fig. 11)
Group function on V6 can assign RXs into Group A, B, C or D, and allows you to choose
which group(s) to fire from the TX unit:
1. All group setting must be set to the same channel.
2. Assign RX units into Groups A, B, C or D by pressing group button. Each RX can only
be assigned to ONE group.
3. Command TX to fire any combination of groups by pressing group button(s). You can
fire any combination of A, B, C and D group.
4. Pressing the group button of active group(s) again will turn off the group(s). V6 RX
units which have been set to the off group(s) will not fire.
5. Switching off V6 will memorize group selection in both TX and RX. Switching on V6
next time will start up with the saved setting.