Cactus RF60, Руководство пользователя

Страница: 31 / 56

31
11.1.2 Multi Flash in Master and Slave
Modes
An RF60 in Master mode will cause
a Slave RF60 that uses the same RF
channel to synchronize to Multi mode
settings.
1. To enter Multi mode on the RF60
Master, press until you see
<MASTER> displayed as the group
name.
2. Press the button once.
The LCD of the RF60 Master and
Slave units will show
and
. Both Master and Slave units
are now in Multi Flash mode.
3. On the RF60 Master, follow the
steps in 11.1.1 to adjust the
number of flashes and flash
frequency per second (Hz). The
flash frequency will apply to both
Master and Slave units in all
active groups.
4. To exit Multi mode, press
twice to return to the
main screen.
Notes:
1. When the number of flashes is
larger than that supported by
the power level of a particular
slave group, it will be reduced
accordingly for that particular
slave
(see table Maximum Number
of Multi Flashes on page 28).