Cactus RF60, Руководство пользователя

Страница: 21 / 56

21
9.2 Commanding with the RF60 Master
1. Set the on-camera RF60 to mode
by pressing (see Section
7.6).
2. Set the RF60 Master to the same
channel as the RF60 Slave units
(see Section 7.7).
3. Check the group statuses on
the group panel. Only activated
group(s) will be shown as A, B, C,
or D boxes.
Changing parameters of the Master
flash
4. On the RF60 Master, you can
change the power level and zoom
level of the Master flash
itself, and the RF60 Slave flashes
in groups A, B, C, and D.
5. The default group is the Master
RF60. In the display, the text
area will show <MASTER>. No group
is selected in the group panel,
though it still shows the group
activation status.