Cabletron Systems WPIM-S/T, Руководство пользователя

Страница: 18 / 56

Chapter 2: Setup and Installation
2-2 WPIM-S/T User’s Guide
Both jumpers must be set to the same setting, either terminated or not
terminated.
• If the WPIM-S/T is the single device on the line, or if it is the end unit,
set both P1 and P2 jumpers to the terminated positions.
• If the WPIM-S/T is on a multidrop line, or the termination is in the
wall jack, set the jumpers to the not terminated positions.
Figure 2-2 shows a close-up of the jumper settings for the terminated and
not terminated positions.
Figure 2-2 Jumper Settings
2.3 SOFTWARE SETUP
The QuickSET CD, included in the WPIM-S/T shipping package,
provides a quick and efficient setup for the WPIM-S/T into the host
device. It is recommended that QuickSET be used for the setup. If a setup
using Local Management and Network Tools is desired, refer to
Chapter 3 .
NOTE
Use the QuickSET procedure or the procedure in Chapter 3 ,
before continuing on to the ISDN setup in Section 2.4 .
TR
TR
P1
P2
TERMINATED POSITION
TR
TR
P1
P2
NOT TERMINATED POSITION
Jumpers
cover
both pins
jumpers