Cabletron Systems WPIM-S/T Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 56

background image

Chapter 3: Local Management

3-8

WPIM-S/T User’s Guide

The fields for the BoD feature are described as follows:

Bandwidth-on-Demand (BoD) option

Specifies whether or not MLP support is desired. To successfully
negotiate MLP, both devices must support MLP. The default setting is
DISABLE.

Line Utilization (LU) Threshold (LUT)%

Specifies a line utilization threshold (%) value to compare against the
linear weighted percentage by which to determine when more or less
bandwidth is to be added or removed. The default setting is 50.

History time in seconds to compute LU Avg. (LUA)

Specifies a time value in seconds over which the line utilization
percentage is averaged by the linear weighted percentage algorithm. The
default setting is 5.

# of LUA computation(s) > LUT for when to add BW

Specifies the number of samples for which the condition for adding more
bandwidth must persist before additional bandwidth is added. This
parameter is used to filter out traffic bursts. The value should be chosen
such that the time it takes to add more bandwidth is less than the time the
traffic will exceed the “line threshold”. This will avoid the additional cost
of adding unnecessary bandwidth. The default setting is 1.

# of LUA computation(s) < LUT for when to remove BW

Specifies the number of seconds that the output has fallen below the line
threshold before previously added additional bandwidth is removed. The
default value is 5.

Maximum # of calls allowed including the 1st call

Specifies the maximum number of channels an MLP call is allowed. The
value accounts for the channel used to establish the original/first link. The
default setting is 1.

When modifying the “Maximum # of calls allowed” parameter, which
accounts for the first call, a check is made against the maximum profiles
setting for that interface. Although the maximum possible value allowed
is shown to be 20, the true maximum is the current maximum profiles
setting for that interface which cannot exceed 20.

NOTE

The user must determine the settings that will work for their
particular network for the following parameters. Therefore, no
settings are indicated, other than default.

«
...
26
27
28
29
30
...
»

Содержание WPIM-S/T

























































Отзывы:

Нет отзывов

Похожие инструкции для WPIM-S/T

Бренд: Data Translation Страницы: 98

Бренд: Hama Страницы: 10

Бренд: F5 Страницы: 72

OXTOPUS EIA-709

Бренд: OCCITALINA Страницы: 54

Sentry Global Security Modem

Бренд: Server Technology Страницы: 22

Бренд: FS Страницы: 19

PoleVault System A/V Source Inputs

Бренд: Extron electronics Страницы: 4

Бренд: A4Tech Страницы: 8

Бренд: Gemtek Systems Страницы: 51

Бренд: Kontron Страницы: 19

Бренд: RubyTech Страницы: 25

DL-DVI-Vision-IP Series

Бренд: G&D Страницы: 228

CY62136EV30 MoBL

Бренд: Cypress Semiconductor Страницы: 12

Бренд: INNOSILICON Страницы: 11

Бренд: NZXT Страницы: 2

WAFER-EHL Series

Бренд: IEI Technology Страницы: 142

Бренд: RadioSPECTRAL Страницы: 2

Бренд: ZALMAN Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды