Cabletron Systems TRXI-22 Скачать руководство пользователя страница 64

Страница: 64 / 92

LOCAL MANAGEMENT

Page 5-10

Setting the System Time

To set the system time:

Use the arrow keys to highlight the System Time field.

Enter the time into the field in a HH:MM:SS format.

Press Return. If the format is not valid, the message “INVALID
TIME” appears. Re-enter the time using the correct format.

If the format is correct, use the arrow keys to highlight the SAVE
command at the bottom of the screen.

Press Return. The “SAVED” message appears on the screen
indicating that your changes have been saved to memory.

Setting the IP Address

To set the IP Address:

Use the arrow keys to highlight the IP Address field.

Enter the IP Address into the field. The format for this entry is
XXX.XXX.XXX.XXX, with values of XXX ranging from 0-255.

Press Return. If the format is not valid, the message “INVALID IP
FORMAT” appears. Re-enter the IP Address using the correct
format.

If the IP Address is correct, use the arrow keys to highlight the
SAVE command at the bottom of the screen.

Press Return. The “SAVED” message appears on the screen
indicating that your changes have been saved to memory.

Содержание TRXI-22





























































































Результаты поиска

Содержание TRXI-22

Отзывы:

Похожие инструкции для TRXI-22

Бренды по названию

Популярные бренды

Cabletron Systems TRXI-22, Руководство пользователя

Результаты поиска

Содержание TRXI-22

Отзывы:

Похожие инструкции для TRXI-22

Бренды по названию

Популярные бренды