Cabletron Systems SPECTRUM TRMMIM Скачать руководство пользователя страница 115 | Manualshive

Страница: 115 / 120

background image

TRMMIM MIB Structure

A-3

TRMMIM MIB Structure

RMON

The RMON, or Remote Network Monitoring, MIB component contains the
statistics, history, alarm, event, and Token Ring groups from the RMON MIB
(RFC 1271 and 1757).

Telnet

The Telnet component provides a means by which you can remotely access the
TRMMIM’s Local Management screens, including MIB Navigator — a command
set from which you can configure and manage your TRMMIM by viewing and
modifying the objects in the device’s MIB. Local management and the MIB
Navigator are accessible through SPMA via the Telnet application; see the SPMA
Tools Guide and/or your TRMMIM hardware manual for more information.

A Brief Word About MIB Components and Community Names

In the original version of the component MIB architecture, each MIB component is
protected by its own set of user-configurable Read-Only, Read/Write, and Super-
User community names. These names determine the level of access that will be
granted to the information controlled by each individual component. For these
devices, the central point of access for remote management is provided by the
Chassis MGR MIB component — that is, if you define your device icon or launch
a management application using the read-only, read/write, or super-user
community name assigned to the Chassis MGR MIB component, your SPMA
application is granted the appropriate level of access (read-only, read/write, or
super-user) to all of that device’s MIB information — even if the other MIB
components have different community names (as will occur of necessity with the
TRMMIM’s multiple Network MIB components, each of which must have a
unique set of community names).

Newer versions of devices with this component-based MIB architecture have
been simplified somewhat; these devices support a single, global set of community
names, with small modifications added automatically to accommodate multiple
instances of the same MIB component (as occurs with the TRMMIM’s Network
components). Again, defining your device icon or launching a management
application with one of these global community names gives SPMA access to all
MIB information.

Where community names may become an issue, however, is when you are using
the MIBTree or any similar MIB-based tool (such as those provided by SunNet
Manager or HP Network Node Manager) to access MIB information. For these
kinds of tools, you must supply the precise community name assigned to the
component that contains the information you want. For devices which support

NOTE

The set of community names you assign via Local Management are those which apply to
the Chassis MGR MIB component.

«
...
113
114
115
116
117
...
»

Содержание SPECTRUM TRMMIM

























































































































Отзывы:

Нет отзывов

Похожие инструкции для SPECTRUM TRMMIM

Netlink FRX8000

Бренд: Cabletron Systems Страницы: 94

MMAC-Plus 9E423-24

Бренд: Cabletron Systems Страницы: 10

MMAC-Plus 9A128-01

Бренд: Cabletron Systems Страницы: 22

Spectrum EMM-E6

Бренд: Cabletron Systems Страницы: 2

SmartSTACK ELS100-24TXG

Бренд: Cabletron Systems Страницы: 112

Бренд: Cabletron Systems Страницы: 86

Бренд: Cabletron Systems Страницы: 54

Cabletron BRIM-F6

Бренд: Cabletron Systems Страницы: 43

Netlink FRX4000

Бренд: Cabletron Systems Страницы: 60

CSX200 CyberSWITCH

Бренд: Cabletron Systems Страницы: 2

Бренд: Cabletron Systems Страницы: 8

Бренд: Cabletron Systems Страницы: 4

Бренд: Garland Страницы: 4

Бренд: iDirect Страницы: 60

Бренд: LaCie Страницы: 4

Бренд: LaCie Страницы: 4

Бренд: hilscher Страницы: 154

kontron COMe-cEL6

Бренд: S&T Страницы: 99

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды