Cabletron Systems SmartSwitch 9A100, Инструкция по установке и настройке

Страница: 28 / 52

3-6 SmartSwitch 9A100 Installation and Setup Guide
Using the Console Configuring the Switch
Entering parameters at the command line is optional. If a command requires parameter values, it prompts you for them.
For instance, in the example below,
show
is the operator,
portconfig
is the switch-attribute, and
a1
is the parameter
indicating that you want to show configuration information about port
A1
.
SmartSwitch # show portconfig a1
=========================================================
Port Name : A1
Trans Type : STS-3c
Media Type : MMF (S)
---------------------------------------------------------
Parameters Configured Current
---------------------------------------------------------
Sig Type autoConfig autoConfig
Sig Role other other
Interface Type private private
Max Vpi Bits 0 0
Max Vci Bits 12 12
Max Svc Vpci 0 0
Min Svc Vci 32 32
Max Vccs 4096 4096
Max Svp Vpci 0 0
Max Vpcs 0 0
ILMI State Admin State up Oper State down
Port State Admin State up Oper State down
Port Bandwidth Max 150.00 MBS Used 0.00 MBS
SmartSwitch #
If you don’t specify parameters with the command, the console prompts you for an input value and provides a default
value displayed in parenthesis. For example, if you enter
show portconfig
without specifying a port (as a parameter),
the following appears. Here, the default of “
all
” ports is presented. You can either accept the default by pressing
Enter
, or you can enter a specific port number. Taking the default (
all
), displays the following:
SmartSwitch # show portconfig
PortNumber(ALL) :
— We accept the default, “Show all ports.”
Port Intf Sig ILMI Trans Media Max Used Oper
Name Type Type State Type Type Bw(MBS) Bw(MBS) State
==============================================================================
A1 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
A2 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
A3 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
A4 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
B1 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
B2 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
B3 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
CPU private uni40 down STS-3c 155.52 11.13 up
CPU.1 private pnni10 down STS-3c 11.13 0.00 up
C1 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
C2 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
C3 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
C4 private autoConfig down STS-3c MMF (S) 150.00 0.00 down
D1 private autoConfig down DS3 Coax 40.70 0.00 down
More(<space>/q)?:
Note
When you accept the (
all
) default for
show
, the information displayed is often
abridged.