Cabletron Systems SmartSwitch 8000, Руководство по началу работы

Страница: 104 / 136

Chapter 3: Software Installation and Setup
90 SSR 8000/8600 Getting Started Guide
7. After verifying the SNMP configuration, save the changes to the Startup
configuration file by entering the following command:
Remember to answer “yes” when the CLI asks you whether you want to overwrite the
Startup configuration.
Setting Up Passwords
You can password-protect CLI access to the SSR by setting up passwords for login access
and Enable mode access. Users who have a login password but not an Enable password
can use only the commands available in User mode. Users with an Enable password can
use commands available in the Enable and Configure modes as well as the commands in
User mode.
In addition, you can set up the SSR for TACACS, , and/or RADIUS
authentication on login and password by a TACACS or RADIUS server. Procedures for
not configured.
Trap Table:
Index Trap Target Addr Community String Status
----- none configured -----
Traps by Type:
Authentication trap: enabled
Link Up/Down trap: enabled
Community Table:
Index Community String Privilege
1. public READ-WRITE
SNMP statistics:
247019 packets received
246346 get requests
745 get-next requests
184 get-bulk requests
50 set requests
0 bad SNMP versions
1 bad community names
0 ASN.1 parse errors
0 PDUs too big
247018 packets sent
246346 get responses
745 get-next responses
184 get-bulk responses
50 set responses
copy active to startup