Cabletron Systems Netlink FRX4000, Руководство по обслуживанию

Страница: 50 / 60

B-2 FRX4000 Maintenance G uide, Rev 03
Remote Backup and Restore (Items A–C)
Items A and B are used to back up a remote node’s database to a local
node that has control of the remote node. Both operations require
first taking remote control (
[B], [A], [A]
from the Main Menu) of the
node whose database will be backed up. Item A allows copying the
database to a directory on the hard disk or a diskette. Item B copies
the database to flash memory on the local FRX4000.
These operations place a heavy load on the FRX4000's
central processor, and should be performed only when
there is minimal traffic on the node.
When backup is performed to an FRX4000, the database will be
copied automatically into a directory named backup.
Item C is used to restore the database that was backed up using item
B. The database will automatically be copied from and to the correct
directories.
Local Backup and Restore (Items D, E)
Items D and E are used to back up a node’s database to a local backup
directory, then restore the database into the original directory. These
operations can be performed on a local or remote (via remote
control) FRX4000, but in either case the operations affect the node
under operator control.
Transferring the Backup directory via ZMODEM (Items F,
G)
Items F and G are used to copy the backed-up database to a PC
attached to the Console port. The PC must be running Procomm Plus
with ZMODEM.
This procedure was tested using Procomm Plus 2.1 for
Windows, but other versions containing ZMODEM
should also work.