Cabletron Systems Netlink FRX4000, Руководство по обслуживанию

Страница: 16 / 60

2-4 FRX4000 Maintenance G uide, Rev 03
Reviewing Boot Messages
As an FRX4000 boots, screen information verifies configuration file
format, and displays any errors. This data is displayed only until the
FRX4000 software is running; however, it is saved in a file named
BOOTRPT.TXT, and the operator can later display it in a report. This
can be used as a tool to verify that startup of the node proceeded
without errors. If there is an error reported, the data may aid in fixing
the problem.
If a node is shut down, then rebooted, the existing BOOTRPT.TXT
file will be renamed BOOTBAK.TXT, and a new BOOTRPT.TXT will
be created. BOOTRPT.TXT and BOOTBAK.TXT can be used as
follows:
1. Display and review the data from the “current” boot of the node.
2. Address any reported problems.
3. Re-boot the node. (This copies the previous boot data to a
backup file.)
4. Display the new boot data, and compare it to the previous data.
This will show whether the problem was fixed. Also, a problem
that occurred during the previous boot-up will often be cleared
up by re-booting.
To display the data from the current boot-up, press [C] at the Reports
menu (or [F] , then [C] from the Main Menu). To display the data from
the previous boot-up (saved in a file called BOOTBAK.TXT), press
[D ] at the Reports menu (or [F] , [D] from the Main Menu).