Cabletron Systems MMAC-Plus 9G536-04, Руководство пользователя

Страница: 25 / 42

2-5
Installing the SmartSwitch 9000 Module
Figure 2-2. GPIM
4. Gently insert the GPIM (20-pin connector side) through the GPIM opening of
the SmartSwitch 9000 module, as shown in Figure 2-3. The door folds to the
left and the slides engage the sides of the GPIM. If the GPIM does not go in
easily, do not force the device. Check the orientation against Figure 2-2. Push
the GPIM back until the 20-pin port engages the GPIM. The latch mechanism
engages when the GPIM connector seats properly in the port.
Figure 2-3. Installing a GPIM into the SmartSwitch 9000 Module
To remove a GPIM from the SmartSwitch 9000 module, squeeze both locking tabs
in towards the center of the GPIM, and pull it out of the port.
2549_04
Network Connection End
20-pin connector
Insertion End
RX
TX
RX
TX
Locking Tabs
20-Pin Connector
(Insertion End)