manualshive.com logo in svg

Cabletron Systems MicroMMAC 22ES, Руководство пользователя, Страница: 80 / 84

Поделиться
Скачать
Cabletron Systems MicroMMAC 22ES Скачать руководство пользователя страница 80

Chapter 11: MIB Navigator Screen

Page 11-16

MicroMMAC Local Management User’s Guide

snmptree:

Syntax:

snmptree [IP address] [community name]

Description:

The snmptree command provides a display of 
all objects in the device and their corresponding 
values.

Options:

Not Applicable

Example:

traceroute:

Syntax:

traceroute [IP address]

Description:

The traceroute command generates a 
TRACEROUTE request to a specified IP 
address and provides a display of all next-hop 
routers in the path to the device. If the device is 
not reached, the command displays all next-hop 
routers to the point of failure.

Options:

Not Applicable

Example:

MIBNav-> snmptree 122.144.89.10 public

# /1/3/6/1/2/1/1/1

# /1/3/6/1/2/1/1/2

# /1/3/6/1/2/1/1/3

# /1/3/6/1/2/1/1/4

sysDescr

sysObjectId

sysUpTime

sysContact

STRING

OBJECT ID

TIME TICKS

STRING

EMRev X.X.X.X

1.3.6.1.4.1.52

8098654

AlZwie/MIS

051476

MIBNav-> traceroute 122.144.11.52

# next-hop[1]  122.144.61.45

# next-hop[2]  122.144.8.113

051477

Содержание MicroMMAC 22ES





















































































Отзывы:

Нет отзывов