Cabletron Systems MicroMMAC 22ES Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 84

background image

Chapter 7: Flash Download Screen

Page 7-2

MicroMMAC Local Management User’s Guide

7.1 SELECTING A FLASH DOWNLOAD METHOD

1. Use the arrow keys to highlight the Download Method field.

2. Press SPACE or BACKSPACE to select a flash download method.

•

If you select RUNTIME, the Reboot After Download field
appears.

•

If you select BOOTPROM, the Commit to Flash field and the
TFTP Gateway Server IP field appear.

7.1.1 Runtime Download

If you select runtime download, perform the following steps:

1. Use the arrow keys to highlight the Reboot After Download field.

2. Press SPACE or BACKSPACE to select one of the following:

•

YES, if you want the MicroMMAC to reboot and use the new
firmware image immediately.

•

NO, if you want the MicroMMAC to continue using the existing
firmware image without interrupting network operation. The
MicroMMAC stores the new firmware image in flash memory.
When you reset the MicroMMAC, it boots from flash memory
using the new image.

3. Use the arrow keys to highlight the Download Server IP field.

4. Type the IP address of the download server and press ENTER.

5. Use the arrow keys to highlight the Download File Name field.

6. Type the complete path and filename of the new image file to be

downloaded. You must include all directories and subdirectories
involved in accessing the file. Type the new entry over the previous
entry. For example: c:\images\,micrommac\11011.hex.

7. Press ENTER.

8. Use the arrow keys to highlight the EXECUTE command located at

the bottom of the Flash Download screen.

9. Press ENTER to begin the download. The MicroMMAC attempts to

download the file using the IP address, filename, and path provided.
This file is assigned to the Flash memory of the MicroMMAC.

«
...
48
49
50
51
52
...
»

Содержание MicroMMAC 22ES





















































































Отзывы:

Нет отзывов

Похожие инструкции для MicroMMAC 22ES

1big Dock SSD Pro

Бренд: LaCie Страницы: 28

Бренд: Eaton Страницы: 40

DMS-1250 Series

Бренд: D-Link Страницы: 38

Бренд: REV Ritter Страницы: 15

Бренд: NETGEAR Страницы: 2

Бренд: FS Страницы: 43

Бренд: Cumberland Страницы: 2

Бренд: Thinklogical Страницы: 17

Бренд: hager Страницы: 2

Бренд: LevelOne Страницы: 15

Бренд: Linkskey Страницы: 2

Бренд: Synergy Global Technology Страницы: 9

Бренд: Banner Страницы: 8

Бренд: BCXLAB Страницы: 6

Бренд: Novy Страницы: 12

Бренд: Abtus Страницы: 2

Бренд: Zigen Страницы: 18

Бренд: StarTech.com Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды