Cabletron Systems IRM-2/LM, Руководство пользователя

Страница: 31 / 36

USING THE SETUP OPTION
5-5
5.1.5 Using the Set Default Gateway Option
Note: Consult your Network Administrator prior to setting the Default
Gateway.
The Default Gateway is the IP address of the network connection
(gateway or router) used in forwarding management information from the
IRM2 (e.g., SNMP traps) to a network management station. Use the
Default Gateway option in conjunction with the Set SubNet Mask option.
Set the Default Gateway option when:
• workstations in the Community Names table reside on a different
subnet (i.e., across a gateway or router), and you want these
workstations to receive SNMP traps.
Use the Default Gateway factory default setting of 0.0.0.0 when:
• all trap designated workstations are on the IRM2 subnet.
To set the Default Gateway:
1. Use the arrow keys to highlight the Set Default Gateway field.
2. Enter the desired address into the field using dotted decimal notation.
The format for this entry is XXX.XXX.XXX.XXX, with value of
XXX ranging from 1-254.
3. Press Return. If you enter an illegal mask in step 2, the error message
"Illegal Information Entered" appears on the screen.
4. Use the arrow keys to highlight the SAVE SETUP option at the
bottom of the Setup screen.
5. Press Return. The message "Modified Screen Information Has Been
Saved!" appears on the screen.