Cabletron Systems IRM-2/LM, Руководство пользователя

Страница: 16 / 36

GETTING STARTED
2-6
Figure 2-3 Front Panel Switches
Modem access to Local Management:
1. Plug the 9 pin end of the RS232 cable into the port labeled CONSOLE
on the IRM2.
2. Plug the 25 pin end of the RS232 cable into the port on the modem.
3. Turn the modem on.
4. Dial into the modem connected to the IRM2. The IRM2 Password
Screen appears once your connection is established.
5. Enter your Password . (The factory default password is the Return
key).
Note: If you enter a Superuser name at the Community Names Screen
(See Chapter 4), the password becomes the Superuser name. If you enter
more than one Superuser name, you may use any of these names as the
password.
6. Press Return . The IRM2 SNMP Local Management screen, Figure
2-1, appears on the terminal.
7. Press Return . The DEVICE/BOARD/PORT COUNTERS screen,
Figure 2-2, appears.
You may now use IRM2 Local Management.
On Off
Not Used
Modem Switch
(Off for Terminal)
Not Used
Not Used
On