Cabletron Systems DLM6C-AA, Руководство пользователя

Страница: 147 / 194

Broadcast Suppression Screen
DLEHF-MA User’s Guide 5-85
6. Use the SPACE bar to toggle between the ON and OFF settings. Press
ENTER. ON forces the source module and port to forward errored
frames and valid traffic to the destination module(s) and port(s). OFF
suppresses errored frames from being sent to the destination module(s)
and port(s), and only allows valid traffic to pass to the destination
module(s) and port(s).
7. Use the arrow keys to highlight the Status field.
8. Use the SPACE bar to toggle between the ADD and DEL (delete)
settings. Press ENTER. This adds or deletes the port selections made
in steps 2 and 4 and also updates the screen Source Port and
Destination Port list.
9. Use the arrow keys to highlight SAVE at the bottom of the screen.
Press ENTER. The message “SAVED OK” is displayed. This saves
the new settings and updates the Source Port and Destination Port
read-only fields.
5.26 BROADCAST SUPPRESSION SCREEN
The Broadcast Suppression screen, Figure 5-30, allows the user to set a
desired limit of receive broadcast frames per port per second. Any
broadcast frames received above the desired threshold, during the one
second period of time, will be dropped.
If more than one port is to be redirected, repeat steps 1 through
8 for each additional setting, then go to step 9 to save all the
new settings at once.
The Broadcast Suppression screen displays only if the
operational mode of the chassis or the DLEHF-MA has been
set to 802.1D SWITCHING or 802.1Q SWITCHING. Refer to
Section 5.7.7, for instructions on configuring the chassis to
operate in this mode and Section 5.15.9, for instructions on
configuring the DLEHF-MA to operate in this mode.