manualshive.com logo in svg

Cabletron Systems CyberSWITCH CSX400, Руководство пользователя

Устройство Cabletron Systems CyberSWITCH CSX400 - надежный коммутатор для сетей. Установочное руководство доступно для скачивания бесплатно на manualshive.com. Позаботьтесь о правильной установке и настройке вашего оборудования, скачав необходимое руководство прямо сейчас.

Поделиться
Скачать
background image

About the CSX400

CSX400 and CSX400-DC User’s Guide 17

Routing —

Routing provides a way to transfer user data from source to destination over different 

LAN and WAN links using one or more network protocol formats. Routing relies on routing 
address tables to determine the best path for each packet. Routing tables can be seeded (i.e., 
addresses for remote destinations are placed in the table along with network address masks and a 
metric for path latency). Routing tables are also built dynamically (i.e., the location of remote 
stations, hosts and networks are updated through inter-router protocols). Routing helps to increase 
network capacity by localizing traffic on LAN segments and broadcasts that would result from 
bridged traffic. It also provides security by isolating traffic on segmented LANs. Routing extends 
the world-wide reach of networks.

CSX400 Bridging and Routing —

The CSX400 can operate as a bridge, a router, or both. The 

CSX400 operates as a router for network protocols that are supported when routing is enabled and 
operates as a bridge when bridging is enabled. When both bridging and routing are enabled, 
routing takes precedence over bridging; i.e., the CSX400 uses the protocol address information of 
the packet to route the packet to the correct destination. However, if the protocol is not supported, 
the CSX400 operates as a bridge and uses the MAC address information to send the packet. 

Operation of the CSX400 is influenced by routing and bridging controls and filters set during 
CSX400 configuration. General IP routing, and routing or bridging from specific remote routers 
are controls set during the configuration process.

IEEE 802.1d Bridging —

The CSX400 supports the IEEE 802.1d standard for LAN to LAN 

bridging. Bridging is provided over PPP and Frame Relay as well as adjacent LAN ports. The 
bridging software uses transparent bridging. When the CSX400 is configured as a bridge, the unit 
bridges data packets to the destination, regardless of the network protocols used. 

The CSX400 uses the Spanning Tree Algorithm to provide bridging redundancy while preventing 
data loops and duplicate data. This is a self-learning bridge, i.e., the bridge builds and updates an 
address table with each MAC source address and associated information when the packets are 
received.

IP Routing —

IP routing support provides the ability to process

 TCP/IP

 frames at the network 

layer for routing. IP routing support includes the Routing Information Protocol (RIP) that allows 
the exchange of routing information on a TCP/IP network. The CSX400 receives and broadcasts 
RIP messages to adjacent routers and workstations.

IPX Routing —

Internet Packet Exchange (IPX) routing support provides the ability to process 

Novell proprietary frames at the network layer for routing. IPX routing support includes both 
Routing Information Protocol (RIP) and Service Advertising Protocol (SAP) that allows the 
exchange of routing information on a Novell NetWare network. The SAP provides routers and 
servers containing SAP agents with a means of exchanging internetwork service information.

Содержание CyberSWITCH CSX400




















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CyberSWITCH CSX400

D-Link DSR-500 User Manual preview
DSR-500
Бренд: D-Link Страницы: 213
H3C S5120V3-EI Series Manual preview
S5120V3-EI Series
Бренд: H3C Страницы: 54
H3C CR16000-M Installation Manual preview
CR16000-M
Бренд: H3C Страницы: 116
Idis DR-6100 Series Operation Manual preview
DR-6100 Series
Бренд: Idis Страницы: 86
Paradyne Hotwire 6301 Installation Instructions Manual preview
Hotwire 6301
Бренд: Paradyne Страницы: 20
Paradyne COMSPHERE 3610 Installation Instructions preview
COMSPHERE 3610
Бренд: Paradyne Страницы: 2
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Бренд: Opengear Страницы: 2
Funkwerk TR 200 aw/ bw Operating Instructions preview
TR 200 aw/ bw
Бренд: Funkwerk Страницы: 2
Axis AXIS P1354 Installation Manual preview
AXIS P1354
Бренд: Axis Страницы: 104
NetBurner MOD5272 Quick Start Manual preview
MOD5272
Бренд: NetBurner Страницы: 15
ZyXEL Communications P-336M Quick Start Manual preview
P-336M
Бренд: ZyXEL Communications Страницы: 125
PairGain PG-Flex FLC-704 Manual preview
PG-Flex FLC-704
Бренд: PairGain Страницы: 20
Amit CDD531AM-U02 User Manual preview
CDD531AM-U02
Бренд: Amit Страницы: 75
HMS Anybus AWB3000 Startup Manual preview
Anybus AWB3000
Бренд: HMS Страницы: 18
B&B Electronics IASW5P Quick Start Manual preview
IASW5P
Бренд: B&B Electronics Страницы: 2
Avocent Cyclades CS4008 Specifications preview
Cyclades CS4008
Бренд: Avocent Страницы: 2
Trend Micro R610 Series Quick Start Manual preview
R610 Series
Бренд: Trend Micro Страницы: 2
Allied Telesis AT-WR4500 Series User Manual preview
AT-WR4500 Series
Бренд: Allied Telesis Страницы: 264

Бренды по названию

Популярные бренды

Загрузить еще бренды