Entering the Bootstrap Program
5
Hardware Installation Guide
C-5
Hardware User’s Guide
To test memory, enter the t command with the m option at the > prompt, as
follows:
t m
To use the default addresses and select the default tests, press the Return key
after each prompt displayed.
The time taken to run a diagnostic is memory-size dependent, but will require a
minimum of ten minutes. If the program encounters memory problems, it will
display appropriate error messages on the console terminal. Be sure to reinitialize
the processor before booting the system by entering i at the bootstrap prompt (>).
C.1.2 Running the Diagnostics
Follow these steps to run the bootstrap diagnostics:
1.
Turn OFF the router.
2.
Restart the router.
3.
Within 60 seconds, press the Break key on the console terminal to force the
server into the bootstrap program. Wait for the server to print the two-line
banner message and for the angle bracket (>) prompt to appear.
