Cabletron Systems Cabletron CyberSWITCH CSX5500, Руководство пользователя

Страница: 139 / 729

Central Site Remote Access Switch 139
C
ONFIGURING
B
ASIC
IP R
OUTING
IP Network Interfaces
The following table provides the possible choices for IP RIP respond control.
*The default switch.
IP RIP R
ECEIVE
C
ONTROL
If IP RIP is enabled for a specific interface, then this element is required.
This controls which version of IP RIP updates are to be accepted. The default value is automatically
preconfigured when IP RIP is enabled.
The following table provides the possible choices for IP RIP receive control.
* The default switch.
IP RIP
V
2 A
UTHENTICATION
C
ONTROL
If IP RIP is enabled for a specific interface, this element is required.
This controls the type of authentication the CyberSWITCH uses on the interface. The default value
is automatically preconfigured when IP RIP is enabled.
Switch Meaning
Do Not Respond This switch indicates responding to no IP RIP
requests at all.
IP RIP v1 Only This switch indicates responding only to IP RIP
requests compliant with RFC 1058.
IP RIP v2 Only This switch indicates responding only to IP RIP v2
requests compliant with RFC 1723.
IP RIP v1 or IP RIP v2 * This switch indicates responding with the same IP
RIP version format as the version of the request.
Switch Meaning
Do Not Receive This switch indicates accepting no IP RIP updates
at all.
IP RIP v1 Only This switch indicates accepting only IP RIP
updates compliant with RFC 1058.
IP RIP v2 Only This switch indicates accepting only IP RIP v2
updates compliant with RFC 1723.
IP RIP v1 or IP RIP v2 * This switch indicates accepting either IP RIP v1 or
IP RIP v2 updates.