Cabletron Systems Cabletron BRIM-F6 Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 132

background image

Fast Ethernet Workgroup Design

7-5

Fast Ethernet

The current network consists of 43 stations, including the shared servers and
order entry system. The department currently operates on two standalone 24-port
Ethernet repeaters that are connected to one another with a single jumper cable.
All stations in the network are connected to these standalone repeaters with
Category 5 UTP cable. All of the distances and network radii have been calculated
to be within the acceptable limits for a Fast Ethernet network using a Class I
repeater.

The Network Designer, looking over the available Fast Ethernet networking
devices, has only a few decisions to make to select a product or series of products
for the installation. The Network Designer decides not to pursue a switched Fast
Ethernet network implementation, due to the perceived higher cost of such a
solution.

The Network Designer then turns to the question of management. Understanding
the value of management functions to a network of this scale and complexity, the
Network Designer intends to incorporate management into the workgroup to aid
in diagnosing problems and controlling the network. Examining the selection
filed, the Network Designer selects the SEHI100TX-22, which provides SNMP
management functions. As the SEHI100TX-22 is a stack base, any non-intelligent
SEH100TX-22 hubs that are connected to the SEHI100TX-22 with HubSTACK
Interconnect Cables will also become a manageable device.

As it has already been established that the proposed network plans to add not less
than 20 users in the upcoming quarter, it stands to reason that the network will
expand even more in the future. This expansion can be managed quite easily by
the SEHI100TX-22 stackable base. Any time that the number of station
connections required by the network exceeds that provided by the Fast Ethernet
stack, an additional SEH100TX-22 non-intelligent stackable hub can be added to
the stack, providing an additional 22 ports.

The Network Designer then double-checks the available port count of the
SEHI100TX-22. While the SEHI100TX-22 can support only 22 of the 43 required
connections, the device is designed to act as a stack base. By adding one
SEH100TX-22 to the stack, the Network Designer expands the port capacity of this
Fast Ethernet repeater domain to 44 users. When the next 20 users are added in
the upcoming fiscal quarter, another SEH100TX-22 can be placed in the stack,
bringing the total number of ports supported up to 66.

«
...
89
90
91
92
93
...
»

Содержание Cabletron BRIM-F6





































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cabletron BRIM-F6

TokenLink 3C359B

Бренд: 3Com Страницы: 4

TokenLink 3C359B

Бренд: 3Com Страницы: 8

TokenLink 3C339

Бренд: 3Com Страницы: 2

EtherLink 3C985B-SX

Бренд: 3Com Страницы: 44

Бренд: 3Com Страницы: 88

Бренд: 3Com Страницы: 2

Бренд: 3Com Страницы: 111

TokenLink 3C359

Бренд: 3Com Страницы: 4

Бренд: 3Com Страницы: 74

Бренд: 3Com Страницы: 6

Бренд: QNO Страницы: 106

Бренд: Face Страницы: 8

Dimension ES-3124

Бренд: ZyXEL Communications Страницы: 228

Бренд: Kramer Страницы: 2

Бренд: MEDIATEK Страницы: 166

Бренд: ACTi Страницы: 14

Бренд: Alcatel-Lucent Страницы: 154

Бренд: MCT Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды