Cabletron Systems Cabletron BRIM-F6 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 132

background image

PIMs and BRIMs

4-8

Bridge/Router Interface Modules

Bridge/Router Interface Modules

In the same way that Cabletron Systems supplied a method for connecting a
single network technology to different types of media, the Bridge/Router
Interface Module, or BRIM, allows one networking technology to be connected to
either a separate, segmented network or to a completely different networking
technology.

The addition of a BRIM to a networking device, be it a standalone Ethernet
repeater or a sophisticated management module within a modular chassis, allows
the device that the BRIM is configured in to access another network. The
interconnection of the device and the additional network is handled by the
internal operation of the BRIM.

In effect, the BRIM takes the concept of the PIM a step further. Rather than
internalizing a transceiver, the BRIM internalizes a dual-interface bridge or router,
supplying segmentation and internetworking capabilities to any BRIM-capable
device. As these capabilities are needed, a BRIM can be added to any
BRIM-capable device. This gradual upgrade path allows Network Designers to
plan ahead for the incorporation of new technologies without having to pay for
the connection until it is needed.

Types of BRIMs

There are a number of different BRIMs available, and each has different
capabilities and characteristics. The foremost of these characteristics are
summarized in Table 4-2 and the text which follows.

BRIM-E6

The BRIM-E6 provides a single Ethernet segment through an EPIM slot. This
EPIM slot may be configured with any EPIM module and operates as a normal,
bridged Ethernet interface. The BRIM provides Ethernet bridging between the
front panel EPIM slot and the BRIM interface within the device.

BRIM-E100

The BRIM-E100 operates in the same fashion as a BRIM-E6, but provides a
connection to a 100 Mbps Fast Ethernet link. The BRIM-E100 provides one front
panel EPIM-100 port which supports any of the Fast Ethernet Interface Modules.

NOTE

Before including any BRIM in a network design, consult your
Cabletron Systems Sales Representative to ensure that the
BRIM under consideration will operate properly in the device
being considered for use.

«
...
36
37
38
39
40
...
»

Содержание Cabletron BRIM-F6





































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cabletron BRIM-F6

Бренд: Garland Страницы: 4

Бренд: ROE Страницы: 41

Speedway Revolution

Бренд: impinj Страницы: 60

Speed Touch 591s

Бренд: Alcatel Страницы: 184

NIC-FC730i-Mb-2-32G

Бренд: H3C Страницы: 37

Бренд: 1&1 Страницы: 32

WNFB-265AXI(BT)

Бренд: Sparklan Страницы: 14

Бренд: TP-Link Страницы: 2

Бренд: Vega Страницы: 12

Ether-GSH24T v3

Бренд: AirLive Страницы: 2

PCMCIA High Speed Serial Card CE 232HSPCC

Бренд: B&B Electronics Страницы: 14

PXI PXITM -1000

Бренд: National Instruments Страницы: 55

Бренд: A.E.B. Страницы: 28

Network Adapter AC AAP

Бренд: Extron electronics Страницы: 2

Бренд: Planet Страницы: 66

Бренд: IEI Technology Страницы: 106

Бренд: Proxim Страницы: 65

Vigor 3200 Series

Бренд: Draytek Страницы: 356

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды