Cabletron Systems 9C106 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 40

Cabletron Systems 9C106 Скачать руководство пользователя страница 9

1-1

Chapter 1

Introduction

Welcome to the Cabletron Systems

SmartSwitch 9000-6 Slot 9C106 and 9C706

Chassis Setup and Installation Guide

. This manual provides installation

instructions and essential reference information for the Cabletron Systems
SmartSwitch 9000-6 Slot networking chassis and its associated modules.

SmartSwitch 9000-6 Slot 9C106 Overview

The following section provides a brief overview of the major components of the
SmartSwitch 9000-6 Slot chassis and describes several of the important features of
these components.

9C106 Chassis

The 9C106 chassis is a networking platform that provides support for the
conÞguration and operation of up to six Cabletron Systems SmartSwitch 9000
interface modules.

Features

Multiple Technology Support

The design of the chassis allows it to provide support for existing and future
Local Area Networking technologies such as Ethernet, Fast Ethernet, Token Ring,
Fiber Distributed Data Interface (FDDI), Systems Network Architecture (SNA),
Wide Area Networks (WAN), and Asynchronous Transfer Mode (ATM).

Unless noted differently, the information in this guide applies to both the 9C106
and 9C706 SmartSwitch 9000-6 Slot chassis, which are referred to as either the
Ò9C106Ó or the ÒchassisÓ.

NOTE

«
...
7
8
9
10
11
...
»

Содержание 9C106









































Отзывы:

Нет отзывов