Cabletron Systems 6H123-50, Руководство пользователя

Страница: 153 / 204

Port Level Security Configuration Screen
6H123-50 and 6H133-37 User’s Guide 5-103
Address (Modifiable)
Used to enter the source address for the LockedOnAddr security state
setting. Once a secure address is defined on a port, only those frames
received with that same source address are processed on that port. Any
other frame detected with a different address is considered as an intruder,
causing the device to execute the actions selected in the Action On
Intruder field. When the security state setting is NonSecure, the field
displays the source address of the last frame.
CONNECTOR # (Selectable)
This command field selects the front panel connector (CONN 1 to
CONN-3 or CONN 4, depending on the module) to which the port
security settings will be applied.
5.29.1 Setting the Port Level Security
To set the security for each repeater port on a connector, proceed as
follows:
1. Use the arrow keys to highlight the CONNECTOR # field.
2. Use the SPACE bar to step to the appropriate connector number.
3. Use the arrow keys to highlight the SECURITY STATE field for a
connector.
4. Use the SPACE bar to step to the appropriate security level.
5. If the security level chosen causes the DisablePort and SendTrap
fields to display under Action On Intruder, use the arrow keys to
highlight the DisablePort field. If the security level chosen does not
cause the fields to display under Action On Intruder, proceed to step 9.
6. To change the DisablePort setting to NoDisable, press the SPACE
bar to toggle the setting.
7. Use the arrow keys to highlight the SendTrap field.
8. To change the setting to NoTrap, press the SPACE bar to toggle the
setting.
9. If the security state selected is LockedOnAddr, use the arrow keys to
highlight the Address field for the port. Otherwise go to step 11.
10. Enter the address to lock on.