8
www.cablematters.com
USB 3.0 Dual-SATA HDD Docking Station with Cloning
3.5 HDD Duplication - Cloning Mode (Standalone)
1) Connect the Dock to the AC power adapter and
power.
NOTE: DO NOT connect the USB cable
2) Insert the
Source
HDD (drive with data) into
Source A
3) Insert the
Target
HDD (drive to receive data) into
Target B
4) Check for proper alignment with the drive connectors
5) Depress the ON/OFF button on the Dock rear and check for the green LED
6) Check for the yellow LED indicators of Source A and Target B
7)
DO NOT
move the Dock while reading or writing files
8) Press the
Clone
button for 5 seconds and release. The blue 100% LED will
light temporarily.
9) Immediately depress the
Clone
button again until the duplication process
begins
10) The blue LEDs flash sequentially from 25% to 50% to 75% to 100%
11) When the cloning is finished, all blue LEDs are lit solid
12) Turn off the power before removing the HDD
IMPORTANT NOTES:
•
All data on the
Target
drive (Target B) will be erased
•
Target
drive must have equal or larger storage capacity to clone the
Source
•
Cloning feature will NOT function if the USB cable is connected to a computer
•
Windows only recognizes 1 drive after cloning. Locate the
Offline
drive and
assign a different drive letter to activate it.
Do
NOT
connect
the USB cable