HARDWARE INSTALLATION
HSW44C as master
1. Connect all sources to HDMI Inputs on the 4x4 HDMI over CAT5 matrix
master HSW44C
2. Connect each DDC output port on the HSW44C to respective DDC
input on the remote receiver HSMR
3. Connect each TMDS output port on the HSW44C to respective TMDS
input on the remote receiver HSMR
4. Connect IR blaster to the IR MAIN jack of HSW44C and direct the IR
blaster to the built-in IR receiver of the sources
5. Connect the 5V 6A DC power supply unit to the HSW44C
6. Power on all HDMI sources
7. Power on the HSW44C
HSMR as receiver
1. Connect each HDMI output to HDMI displays
2. Connect each DDC output port on the HSW44C to respective DDC
port on the HSMR
3. Connect each TMDS output port on the HSW44C to respective TMDS
input on the remote receiver HSMR
4. Connect IR receiver and place the IR receiver at the appropriate
position that can receive the IR command signals sent from the users
5. Dial the 8-level rotary control switch to adjust the HDMI signal level
until the picture and sound are clear
Definition of IR Earphone Jack
IR Blaster
IR Receiver
The IR extension cables are standard market configuration. You can
buy from CE labs if necessary for replacement use.
Supported IR Data Format
Data Format
Suitable
Not Recommended
NEC
RC5
TOSHIBA MICOM CODE
GRUNDIG CODE
SONY 12 BIT CODE
SONY 15 BIT CODE
SONY 20 BIT CODE
RCA CODE
RCM CODE
MATSUSHITA CODE
MITSUBISHI CODE
ZENITH CODE
JVC CODE
M50560-001P
MN6125H
MN6125L
MN6014_C5D7
MN6014-C6D6
MC14457P
LC7464(AHEA)
GEMINI_CM
