CABINETS TO GO Findley & Myers OC3384SD, Инструкция по сборке

Страница: 3 / 4

Page 3
If the
OC
you are installing runs the length of your ceiling height, it is
recommended to assemble the unit standing to avoid scraping your ceiling.
►
Instructions:
2.
Installing the Side Panels:
Insert the right and left side pane ls (B) i nto the grooves of the back panel
(
D
) and ali gn the cam lock connectors. (Figure 2) Lock the cam lock with a screwdriver by turning the screw 180°
clockwise. (Figure 3)
3.
Installing the Toe Kick (F):
Place the toe kick
(F)
at the end of side panels
(B)
. Align each cam lock on th e
toe kick and lock them.
(Figure 4 )
4.
Install the Top & Bottom Panels (C & D )
by sliding them in to the grooves.
5.
Install the face frame (A)
by placing ca m lo ck s id e d own o nt o the box of the cabinet.
(Figure 6)
Align all
grooves and cam locks onto the face frame and coordinating cam locks. It may be necessary to open all
cabinet doors. Lock all face frame cam locks with a screwdriver.
(Figure 3)
A
Figure
6
Figure 2
E
B
D
Figure 4
Figure 3
F
D
C
B
Figure 5
B
C
C
Figure 1
1.
Put the Back Panel (
E
) face up on a fl at soft worki ng surface to ensure that the surfa ce is not scratched
or damaged. Attach the drawer rail holders
(c)
to the pre-spotted areas using the supplied screws.
(Figure 1)
c
Qty 6
Top
c
NOTICE