-2-
COMPONENT LIST
DIAGRAM
PART
PART NO.
NUMBER DESCRIPTION
NUMBER
1
Cutting Blade (2)
52-0301
2
Spin Tester Assembly (2)
52-0302
3
Shaft Position Bracket
52-0305
4
Measuring Tape
52-0316
5
Socket Head Cap Screw
52-0320
6
Power Cord
N/A
7
On/Off Switch
N/A
8
Dust Collector
52-0331
9
Dust Collector Bracket
52-0332
10
Thumb Screw (2)
52-0333
11
Small (1-1/4” (3.2 cm)) Dust Collector Adaptor 52-0340
12
Large (2-1/4” (5.7 cm)) Dust Collector Adaptor 52-0341
13
Arrow Shaft Guide
52-0306
14
Electric Motor 8000 RPM
52-0202
15
Rubber Feet
52-0329
16
Wrench Kit
52-0330
17
Blade Mounting Bracket Assembly
52-0314
17a Blade Spacer
17b Blade Retaining Nut
ARROW SAW BLADE REPLACEMENT
Your
Arrow Saw
comes complete with two, reinforced
Cutting Blades
.
These
Cutting Blades
are ideal for cutting both carbon and aluminum
arrow shafts. To order replacement
Cutting Blades
, contact Customer
Service at the telephone number listed on the back of this manual.
1. Set the
On/Off Power Switch
to the “OFF”
position. Disconnect the
Power Cord
from the
power source.
2. Loosen the two
Thumb Screws
holding the
Blade Shield
to the
Arrow Saw
.
Figure 13
3. Remove the
Thumb Screws
and
Cutting
Blade Shield
.
3. Remove the
Socket Head Cap Screw
securing the
Arrow Shaft Guide
to the
Base
.
Figure 14
4. Remove the
Arrow Shaft Guide
.
5. Insert the long leg of the largest
Allen
Wrench
supplied with your
Arrow Saw
into
one of the holes in the outer edge of the
Blade
Mounting Bracket.
Figure 15
6. Place the
Wrench
onto the
Blade Retaining
Nut
. While holding the
Allen Wrench
, loosen
the
Blade Retaining Nut
(rotate counter
clockwise) until you can remove it by hand.
7. Remove the
Blade Retaining Nut
,
Blade
Spacer
and
Cutting Blade.
8. Carefully install a new
Cutting Blade
.
CAUTION
: NEVER USE A BROKEN, WORN
OR CRACKED BLADE!
9. Re-install the
Blade Spacer
and
Blade
Retaining Nut
.
10. Re-install the
Arrow Shaft Guide
and
Blade Shield
.
CAUTION
: NEVER OPERATE
THE ARROW SAW WITHOUT THE BLADE
SHIELD SECURELY MOUNTED IN PLACE!
The
Arrow Saw Cutting Blade
rotates at very high speeds. It is normal for the
Arrow
Saw
to vibrate during operation. If you experience excessive noise and/or vibration
during operation, or blade breakage, check all parts to ensure they are properly and
securely mounted. If the problem continues, please contact Customer Service.
FIGURE 13
Blade Shield
Thumb Screws
Arrow Shaft
Guide
FIGURE 14
Arrow Shaft
Guide
Socket Head
Cap Screw
Base
Cutting
Blade
FIGURE 15
Allen
Wrench
Cutting
Blade
Base
Blade
Mounting
Bracket
Blade
Retaining
Nut
Blade
Spacer
Wrench
-11-
WARNING!
Before cleaning, assembling or disassembling the Arrow
Saw, make sure it is turned OFF and the PLUG IS REMOVED FROM THE
OUTLET/POWER SOURCE!
Before beginning the assembly, check the package contents for all of the parts.
If you are missing any parts, or if any parts are damaged, contact
Cabela’s Customer Service- Retail Store Purchases 1-800-905-2731 (U.S. & Canada) /
Catalog & Internet Purchases: 1-800-237-8888 / All International: 1-308-234-5555
