
6
CONTROL PANEL FUNCTIONS
OPERATING INSTRUCTIONS
There are eleven basic functions on the Pro Series Control Panel:
Step 1:
Place unit on flat, dry and stable surface. Allow 12” (31cm) clearance on all sides of
dehydrator from walls and other electronic devices to allow air intake from the rear and
proper ventilation of exhausted air from side panels.
Step 2
: The door is secured with a magnet on the top of the door frame. Place 4 fingers
underneath the Cabela's logo, on the center of door. Place thumb on the control panel and
pull firmly. This will release the magnet and prevent damage to door. Slowly let the door
down until it rests in a horizontal position.
Step 3
: Slide the trays out towards you.
Step 4:
Prepare foods or crafts and load trays. Do not let items over hang edges and allow
3/4” space between items for best results.
Step 5
: Place the loaded tray, softly, into the dehydrator until it touches the back of the
dehydrator screen. Do not jam against screen.
Step 6
: Located on the bottom of your dehydrator you will find a solid tray. This is your drip
tray. This collects the drippings. Please keep this tray in whilst dehydrating. None of these
parts are dishwasher safe. HAND WASH ONLY.
6.
POWER ON/OFF
7.
INCREASE TIME/TEMP BUTTON
8.
TIME REMAINING INDICATOR LIGHT
9.
TIME SET BUTTON
10.
SET TIME INDICATOR LIGHT
11.
SET TEMP INDICATOR LIGHT
1.
TEMPERATURE SET BUTTON
2.
ACTUAL TEMP INDICATOR LIGHT
3.
DECREASE TIME/TEMP BUTTON
4.
FARENHEIT TO CELSIUS
CONVERSION PORT
(Insert toothpick or paper clip to convert)
5.
DIGITAL LED SCREEN