CabCAM A-CC7M2CQR, Руководство по эксплуатации

Страница: 14 / 22

S
MAIN MENU
OSD SETUP
SYSTEM SETUP
TRIGGER SETUP
TRIGGER PRIORITY
RESET ALL
CAMERA SETUP
SYSTEM SETUP
AUTOSCAN OFF
SCAN DELAY 01 SEC
JUMP KEY LEFT
POWER ON H-SPLIT
BEEP ON
SYSTEM NTSC
DIMMER 01
REC-V OUT QUAD
LEFT H - SPLIT
RIGHT TREFOIL
FRONT Y - SPLIT
BACK
QUAD
DUAL
TRIPLE
PIP1
PIP2
PIP3
MAIN MENU
OSD SETUP
SYSTEM SETUP
TRIGGER SETUP
TRIGGER
PRIORITY
CAMERA SETUP
_
+
/
7.3 Jump Key Setting
-
11
-
REC-V OUT:
To set the camera input(s) to be recorded when connected to DVR via the green RCA wire.
Left-side, right-side, front view, rear view camera and quad view image can be selected.
AUTOSCAN:
To set the auto scanning function. When AUTOSCAN is set as ON,
monitor will automatically switch between connected camera inputs and quad image.
SCAN DELAY:
To set the switching time of AUTOSCAN. Switching time frame: 0-60 seconds.
JUMP KEY:
To set the shortcut display mode from the 13 modes to the left.It can be activated by jump key selector.
POWER ON:
To set the default display model from the 13 modes to the left or STANDBY mode.
BEEP:
To turn on / off the warning tone. Default setting is ON and there will be a beeping sound when menu is being operated.
SYSTEM:
To set TV system: PAL / NTSC.
DIMMER:
To set backlighting brightness level of screen. Five levels and AUTO option are available;the higher the level,
the brighter. When set as AUTO, backlighting automatically adjusts in accordance with the outer brightness.