CabCAM A-CC7M2CQR, Руководство по эксплуатации

Страница: 20 / 22

Symptom Possible Causes/ Solutions
No picture, no sound
No picture
No sound
Dark picture
No color
Upside down or lateral
inverted picture
No reverse gear activated
screen
(i.e. Picture)
Improper connection of a utomobile Use of un-
authorized power supply. Power s witch is on OFF position.
adapter.
Check whether AV cable is properly connected .
Check whether audio wire is properly connected or the sound
volume is turned off or set too low .
Check whether bright ness and contrast are adjust ed correctly;
Check whether the environmental temperature is too low.
Adjust the color settings.
if the reverse gear is activated but no back-up image is shown
on the display, please check whether the reversing trigger is
loose (not connected well with the reverse light).
9 . Troubleshooting
The symptoms described below do not necessar ily mean a failure with in the
display. Please check the following items before you initiate request for repair.
Use the remote control horizontal /vertical selection switch to set
proper orientation
-
17
-