7
FIRST USE
Connect THE PEARL to the mains with the proper power cord.
THE PEARL is operational as soon as the LED on the left of the rear panel opposite is lit in
solid blue.
A voice announcement, if the volume of THE PEARL is not at a minimum, indicates the
status of the network connection: current, successful, failure.
REMOTE CONTROl ACTIVATION
Before first use, unscrew the screw
(PH00 screwdriver), remove the cover,
remove the protective tab, replace the
cover and retighten the screw.
The blue lED on the remote control
flashes, waiting for pairing.
PAIRING THE REMOTE CONTROl
1- Connect the speaker to the mains.
2- Switch on the speaker using the on /
off button on the back.
3- Press the "pairing" button on the
back of THE PEARl briefly. the
lED "pairing" flashes.
4- The lEDs on the remote control and
THE PEARl stop flashing when the
pairing is finalized.
Replacement of the CR-2450 type
button-cell: turn the remote control over,
unscrewthe screw, remove the cover,
remove the old battery, insert the new
battery, marked "+" to the outside, replace
the cover, tighten the screw.
