9
BlUETOOTH CONNECTION
1. Once the speaker is on, press the "Pairing" button on the back
2. The "Pairing" LED on the back should flash
3. Activate Bluetooth on your mobile
4. Select "THE PEARL XXXX Cabasse" from the list of available devices
5. Once the connection is successful, the LED "Pairing" on the back stops flashing
WIRE CONNECTION (lAN) TO THE ETHERNET NETWORK
The wired Ethernet connection guarantees an optimum
and constant transfer rate in any environment. Use this
if Wi-Fi mode operation shows untimely cuts or stops
of music, signs of a saturated Wi-Fi network, or too
much router-to-stream distance.
Connect an RJ45 cable between THE PEARL and
your router (or Box Internet). The connection is
established when the ETH diode changes to solid blue.
The WIFI connection is then automatically disabled.
CAUTION: DHCP mode of the router must be enabled.
