e n g l i s h
36
UNPACKING
Open carton flaps; remove all the compo
-
nents. If the speakers or the subwoofer appear
damaged, do not use them. Repack everything
in the original packing and contact your
authorised Cabasse dealer immediately. We
suggest you to retain the packing for future
use.
SETTING UP
THE COMPONENTS
OF YOUR SYSTEM
1 STREAM AMP, 1 power cord, 1 optical
cable, 1 RCA-RCA cable, 1 remote control, 1
manual and one warranty card.
INSTALLATION
Place STREAM AMP within reach of a mains
plug.
Leave enough free room above and around
STREAM AMP in order to:
- allow good wifi and Bluetooth transmis
-
sion,
- give access to a smartphone for easy NFC
tap Bluetooth connection.
- provide a good air circulation for cooling.
POWER CONNECTION
Connect the power cord to the STREAM
AMP, plug it into the mains and position the
POWER ON/OFF switch to "ON" Stream
Amp is ready to play when the LED
9
turns
on.
NOTE: the WIFI mode of STREAM AMP is
available when the PWR (Power) LED has
turned from red to green, around 40 seconds
after switching on the STREAM AMP.
ON / ECO
a) Switching to ECO mode: press the
1
key of the Stream remote control or of the
STREAM AMP keypad. The wifi and Bluetooth
functions remain available. The audio section
of STREAM AMP is no longer powered.
b) Getting back to ON mode:
- press the
1
key of the Stream remote
control or of the STREAM AMP keypad or
- launch a Bluetooth connection (NFC or
other) or
- press "Play" on the StreamCONTROL
application.
Содержание Stream Amp 100
Страница 1: ...OWNER S MANUAL STREAM AMP 100 www cabasse com ...
Страница 2: ...e n g l i s h 24 24 ...
Страница 3: ...25 218 190 91 218 ...