2
Getting Started
—————————————————————————————————
Actiwin Company Limited disclaims any
responsibility for, and the warranty will be
voided by, the following actions:
• Installation and use of any damaged components.
• Modification of the burner assembly.
• Installation other than as instructed by Actiwin
Company
Limited
.
Any such action may cause a fire hazard
!
WARNING
This appliance is a Decorative Gas Appliance for
OUTDOOR USE ONLY
and
MUST NOT
be
used for cooking.
Place the CabanaCoast® Fire
P
it
on a flat and stable sur-
face in an outdoor location such as a patio or deck.
This location must be adjacent to the gas supply line or
LP gas supply cylinder.
DO NOT
locate the appli-
ance where it will get excessively wet or submerged in
water.
A. Design and Installation Considerations
When planning an appliance installation, it’s nec-
essary to determine the following
information before
installing:
• Where will the appliance be installed?
See section 3
• Gas supply piping.
See section 4
• Framing and finishing details.
See sections 3,7
B. Tools and Supplies Required
Before beginning the installation, be sure that the fol-
lowing tools and supplies are at hand.
•
Gloves
•
Safety Glasses
•
Phillips screwdriver
•
Non-corrosive leak-check solution
•
Wrenches
•
1 AAA battery
Asphyxiation Risk
• This gas appliance is for outdoor use in a well-
ventilated space.
• This unit must not be installed inside an enclosed
structure or unvented appliance
!
WARNING
Do
NOT
use this appliance if any part of it has been
underwater. Have a qualified service technician in-
spect the appliance and replace any part of the control
system and any gas control which has been underwa-
ter.
!
WARNING
Sharp Edges
Wear protective gloves and safety glasses during in
stallation
CAUTION
Do not burn solid fuels in this gas appliance
!
WARNING
C. Inspect the Appliance and Components
Inspect appliance and components for damage.
Damaged parts may impair safe operation.
•
Do
NOT
install damaged, incomplete, or substitute
components
!
WARNING
•
Carefully remove all burner components from pack-
aging.
•
Read all instructions before beginning installation.
Follow these instructions carefully during installation
to ensure maximum safety and benefit.
5
