CabanaCoast AXIS CANTILEVER, Руководство пользователя

Страница: 12 / 32

12
fixed to the deck frame/joists using suitable hardware. These may be large
galvanized nails, coach screws or builders brackets etc. If the installation is in a
sea spray zone or coastal environment then stainless steel hardware is
recommended.
You can now use the four holes already drilled in your decking and drill them all
the way through the newly installed “nog”/brace under the decking. Put the
deck plate in place and install purchased through the plate, decking and nog. Use
a washer and nut on the underside of the bolt under the deck and torque down
tight. After the deck plate has been securely fixed to the deck you should now
remove the four “grub bolts” that are installed in the four spigot-bolt holes. (The
purpose of these grub bolts is to keep dirt out of the threaded holes when not in
use). Attach the spigot to the deck plate using the supplied hardware and
tighten down with the supplied allen key. Lift the Axis umbrella onto the spigot
on top of the base plate. Now you can carefully open your umbrella for the first
time.