CabanaCoast AXIS CANTILEVER, Руководство пользователя

Страница: 6 / 32

6
Your Axis Cantilever Umbrella is delivered fully assembled. There are four
different ways to install your Axis Cantilever Umbrella:
1. Installing on a wooden deck using a Deck Plate.
2. Installing on an existing concrete slab or pavers using a Deck Plate.
3. Installing into the ground (i.e. into a lawn, garden or paved patio) using the In-
Ground mount.
4. Installing on a free-standing base.
Prior to installing your installation mounts please read the important
information below:
CORRECT ALIGNMENT OF INSTALLATION OPTIONS: Your Axis Cantilever
Umbrella can rotate 360° and be locked in 16 different locations. This means
that every 22.5° of rotation there is provision to lock the umbrella. In most
situations there will be a preferred area over which you will predominantly want
shade. To ensure you have the ability to shade your preferred location you must
have one of the 22.5° rotation locking holes in line with this position. Please
have a look at the underside of your spigot to see these 16 locking holes
There is a locking hole in line with each of the 4 spigot bolt holes in the spigot
plate. There are also three intermediate holes between each of the spigot bolt
holes and these are marked with an indicator mark on the top of the spigot
plate.
To point your umbrella in the perfect direction or to have a symmetrical
installation (especially when installing square umbrellas) it is very important to
make sure you install the Base Plate or In-Ground mount square to the
direction that you predominantly want the umbrella to point.